How to Replace Window Handles
Over time, natural elements and daily use can wear a window handle down to the point where it requires replacement. When you spot any damage or a decline in performance, it is essential to act.
Replacing the window handle is simple and requires only a few easy steps. Remove the screw covers and then the handle, the screws.
Replacement Parts
Window handles are a typical wear component on uPVC windows. If you are replacing a window that has broken it is crucial to have the appropriate replacement components, whether you require an espag handle or cockspur lock. This will enable you to restore your windows to full working order and improve the security of your home.
The first thing you'll have to do is locate an alternative uPVC handle. This can be found here:
Once you have done this you will then need to cut the spindle to the correct size. You can make use of an angle grinder or hand saw for this. It's important that you do this correctly as incorrectly cutting the spindle may result in the window handle not fitting properly or, even more dangerously, falling off completely.
Installing the new uPVC handle is simple once you have cut the spindle to the right size. You must make sure that the handle is in an open or locked state before you do this. This allows you to align the screw holes to the existing ones and then screw them in place. It's also recommended to replace the screw covers once you've installed the new handle to prevent any dust or debris from getting into the holes.
It is worth mentioning at this point that the screws used for installing a uPVC window handle may differ from the screws used to remove a window handle, so it is advisable to verify when you purchase the item to ensure to ensure you have the proper screws needed to do the job. Most of our handles come with all the tools you need to take out an old handle and install a new one.
If you require further assistance or guidance regarding replacing your uPVC windows and doors then do not hesitate to contact us here at Bridgewater Glass. Our experts are available to assist with any issues you might be experiencing and will provide expert uPVC repair services.
Take a measurement of the Spindle
The square metal bar that runs through the back of the handle and through the lock mechanism is called a spindle. The spindle needs to be located before you can replace the handle. It is usually secured with screws or pins that can be removed with the screwdriver. Before you remove the handle that was previously attached, you should wipe down the area it is fixed to the window frame using a damp cloth. This will make the removal process of the handle a lot easier.
Once you have located the fixing screws or pins, take them from the window frame as well as the handle. Then, slide the new handle into place and screw it in. Make sure you align the screw holes in the handle and those on the window frame so that they match. Replace any missing screw caps.
Window handles come in a variety of sizes and styles. But the most important feature is that all of them are designed to fit the same type espagnolette bolts found on uPVC or timber windows. You can easily upgrade your windows with a brand new handle style. There are tilt and turn handles which are in compliance with Secure by Design requirements.
In addition to the look of the handle, you can choose from a range different locking options and finishes. Some of these include a push-button for a 'locked closed' position as well as key-locking (and non-locking of the fire escape when necessary). You can select between the cranked handle and an inline handle. The former gives more room for your hands against the window, whereas the latter is more neat.
Once you've replaced the handle, you should test it to make sure it functions properly and securely. If you are satisfied with the results then you can take off the handle (if necessary) and replace the screw caps. This will give you a high-quality, modern replacement for your uPVC window handles. The handles are available in a selection of white, black chrome, gold, and dark bronze finishes. They can be fitted with a standard spindle or a longer version, and can be used on all types of uPVC window.
Take off the handle from the old one.
Window handles can make a huge difference to the overall appearance of windows. Picking the right handle for windows is a delicate process. Handles come in a wide range of designs and finishes, so it's important to select one that suits the style of the window. repairmywindowsanddoors 's also important to take into consideration the type of window you have, because certain styles won't work with others.
Espag handles are commonly found on uPVC windows and come with two options: in-line and cranked. In-line handles are straight and turn left or right, and are often called universal window handles. Cranked handles feature a small curved piece at the back that you can move to open or close the window and they are available in left and right-handed versions.
You'll need a handle that is compatible with tilt and turn windows. These handles are similar to espagnolette however they feature an elongated spindle on the back, which is located in the gearbox inside the lock mechanism. The diameter of the spindle is usually 7mm, but there are handles with a larger cross-section that is suitable for windows made of wood.
Additionally, you should to consider the step height when you are choosing the handle you want to purchase. This is the distance from the top of the nose of the handle to the frame and it is vital to get this correct.
It's now time to test your new handle. You can accomplish this by using the Javascript executor to navigate and click on various elements on a web page. You'll need to utilize the window handle function, which prints out all handles that are generated by a browser. You can identify the handle of the parent window, and then create a child window to carry out various actions on a web page. Selenium's guide will help you if you have any questions about the window handle functionality.